HEC7428 Integrated Sensor

///HEC7428 Integrated Sensor
HEC7428 Integrated Sensor 2018-03-27T16:39:13+00:00

Project Description

HEC7428 Integrated Sensor

HEC7428 Integrated Sensor

HEC7428 Integrated Sensor

Hytronik’s integrated LED Driver-Sensor provides a cost effective solution by combining a remote controlled intelligent HF (microwave)
occupancy sensor with a selectable constant current LED driver. HEC7428 supports easy installation options, with board surface-mount
and through-board. Driver provides up to 28W output while integrated sensor provides remote control programming for distributed,
intelligent lighting control of: daylight monitoring, hold-time, stand-by time, dim level, as well as, maximum light output.

Model no.: HEC7428 with HRC-05

Daylight monitoring function with threshold control ( smart photocell function)

Tri-level control (corridor function)

Multiple current selections

LED maximum load and voltage

Technical Data
Operating voltage : 120~277Vac 50/60 Hz
Input current: 0.26~0.14A
Input power: 32.5W (Max.)
Stand-by power: <0.5W
Warm time: 20s
Detection area: 100%/50%/10%  on RC
Hold time: TEST 2s /30s /1min / 5min / 10min / 30min on RC
Daylight threshold: 2Lux / 10Lux / 50Lux / Lux disable, real-time sampling on RC
Standby period: 0s /10s / 1min /  10min/ 30min /+ on RC 
Standby dimming level: 10%/ 20%/ 30%  on RC
Microwave frequency:  5.8GHz+/-75MHz
Microwave power: <0.2mW
Detection range: Max. (ØxH): 8m x 5m
Detection angle: 30°~150°
Mounting height: Max. 5m
Output LED current:  350mA / 500mA / 550mA / 700mA / 750mA / 900mA
Output LED voltage: 10~48V (350mA)  10~48V (500mA)   10~46V (550mA) 10~40V (700mA)     10~37V (750mA)   10~31V (900mA @ 277V)/10~26V(900mA @120V)
Output LED power: 3.5~17W (350mA)     5~24W (500mA)     5.5~25W (550mA)   7~28W (700mA)      7~28W (750mA)    9~28W (900mA @ 277V)/ 9~23W (900mA@120V)
Empty load voltage: 60V
 Power factor: 0.9
Efficiency: 85% (Max)
Operating temperature: -20°C ~ +50°C    TC:75°C
Abnormal protection: Output short-circuit protection with auto-reset
EMC standard: Part 15B
Safety standard: UL 8750
Certification: FCC,  cULus listed
Dielectric strength:  Inputoutput:3750VAC /5mA/1min
IP rating: IP20

HEC7428 Integrated Sensor