////TRIDONIC Driver LC 75W 250–550mA 1-10V lp EXC
TRIDONIC Driver LC 75W 250–550mA 1-10V lp EXC 2019-03-14T00:00:22+08:00

Project Description

TRIDONIC Driver LC 75W 250–550mA 1-10V lp EXC

Send Inquiry

TRIDONIC Driver LC 75W 250–550mA 1-10V lp EXC

Product description

  • Constant current LED Driver for luminaire installation
  • Dimmable via 1 … 10 V interface
  • Dimming range 10 – 100 % (Depending on load, for details refer to chapter 4.7 Dimming in data sheet.)
  • Adjustable output current between 250 and 550 mA via ready2mains Programmer or I-select 2 plugs
  • Max. output power 75 W
  • Up to 94 % efficiency
  • For luminaires of protection class I and protection class II
  • Nominal life-time up to 100,000 h
  • 5-year guarantee

Housing properties

  • Low profile metal casing with white cover
  • Type of protection IP20

Interfaces

  • ready2mains configuration
  • 1 … 10 V dimming interface
  • Terminal blocks: 0° push terminals

Functions

  • Adjustable output current in 1-mA-steps (ready2mains, I-select 2)
  • Dimmable via 1 … 10 V interface
  • Protective features (overtemperature, short-circuit, overload, no-load, input voltage range)
  • Suitable for emergency escape lighting systems acc. to EN 50172

Benefits

  • Application-oriented operating window for maximum compatibility
  • Best energy savings due to high efficiency and dimming via 1 … 10 V interface
  • Flexible configuration via ready2mains and I-select 2
  • Reliability proven by life-time up to 100,000 h and 5-year guarantee

Typical applications

  • For linear/area lighting in office applications
Rated supply voltage 220 – 240 V
AC voltage range 198 – 264 V
DC voltage range 176 – 280 V
Mains frequency 0 / 50 / 60 Hz
Overvoltage protection 320 V AC, 48 h
Typ. rated current (at 230 V, 50 Hz, full load) (1) (2) 356 mA
Typ. current (220 V, 0 Hz, full load, 100 % dimming level) (2) (3) 365 mA
Leakage current (at 230 V, 50 Hz, full load) (1) (2) < 250 µA
Max. input power 80.6 W
Typ. efficiency (at 230 V, 50 Hz, full load) (2) 94 %
λ (at 230 V, 50 Hz, full load) (1) 0.98C
Typ. input current in no-load operation 24 mA
Typ. input power in no-load operation 0.6 W
In-rush current (peak / duration) 25.8 A / 280 µs
THD (at 230 V, 50 Hz, full load) (1) < 10 %
Starting time (at 230 V, 50 Hz, full load) (1) < 500 ms
Starting time (DC mode) < 500 ms
Switchover time (AC/DC) (4) < 0.2 s
Turn off time (at 230 V, 50 Hz, full load) < 50 ms
Output current tolerance (1) (5) ± 5 %
Max. output current peak (non-repetitive) ≤ output current + 35 %
Output LF current ripple (< 120 Hz) ± 5 %
Max. output voltage (U-OUT) 250 V
Dimming range (6) 10 – 100 %
Mains surge capability (between L – N) 1 kV
Mains surge capability (between L/N – PE) 2 kV
Burst / surge peaks output side against PE 2 kV
Type of protection IP20
Life-time up to 100,000 h
Dimensions L x W x H 280 x 30 x 21 mm
  • (1) Valid at 100 % dimming level.
  • (2) Depending on the selected output current.
  • (3) Valid for Drivers with „DC new“ on the label. For old version typ. current (220 V, 0 Hz, full load, 50 % dimming level) is 180 mA.
  • (4) Valid for immediate change of power supply type otherwise the starting time is valid.
  • (5) Output current is mean value.
  • (6) The min. achievable dimming level depends on the connected load. For details refer to chapter 4.7 Dimming in data sheet.