Lamp Ready Wrap Fixture Factory Supplier

Commercial Contractor & OEM/ODM Partnership Overview

As an established B2B commercial lighting manufacturer and direct factory, Brandon provides robust, commercial-grade led t8 ready surface wrap housings designed to streamline field installations, accelerate code approval, and lower overall project bids. Operating on a strict Make-to-Order (MTO) production framework, we do not supply generic off-the-shelf clearance inventory.

Every run of our direct wire wraparound housing is engineered fresh from our production lines under strict quality control. With a scalable monthly production capacity of 60,000 to 70,000 units, we guarantee stable lead times and continuous supply chains for large-scale North American distribution networks, government retrofits, and multi-site commercial bids.

Verified Regulatory Compliance: UL Listed E500176

In the North American commercial construction market, safety documentation is non-negotiable. Our lamp ready wrap fixtures are fully certified under UL Listed File Number E500176, ensuring complete compliance with the National Electrical Code (NEC) and local municipal building mandates. This official tracking number gives electrical contractors, electrical distributors, and engineering specifiers total peace of mind during submittal reviews and final on-site inspections.

The Lifecycle Advantage: True Component Flexibility

Our housing only (tubes sold separately) engineering setup gives purchasing agents and electrical contractors the upper hand in project cost control. By avoiding pre-packaged integrated fixtures, you are free to source your own preferred Type B T8 lamps to match specific project lumen outputs or cct selectable requirements. This modular architecture keeps future maintenance overhead low, allowing facility teams to replace individual tubes over time without tearing down the heavy-duty steel body shell from the ceiling matrix.

Engineering Focus: Eliminating the Ballast Liability

Every unit leaves our assembly lines fully configured to bypass the ballast entirely, supporting high-efficiency UL Type B direct-wire protocols. Removing traditional fluorescent ballasts permanently eliminates the number-one failure point in commercial linears strips layouts. This cuts parasitic utility power draw, protects the system from transformer degradation, and saves building management significant ongoing replacement labor.

Technical Specifications and Product Parameters

To support rigid commercial blueprints and electrical scheduling sheets, our production plant manufactures these heavy-duty wraparound housings to precise North American structural standards.

Mechanical & Electrical Parameters

• Model Dimension (4ft): 48-2/8″ x 4.8″ x 2″ (Standard 4-Foot Dimensions)

• Chassis Construction: Die-formed heavy-gauge steel body with rigid matching end caps

• Optical Diffuser: High-transmission, impact-resistant acrylic prismatic lens

• Wiring Configurations: Pre-wired for Single-End or Double-End Type B LED T8 tubes

• Electrical Capacity: Designed for 4ft T8 linear tubes up to a maximum of 22W per lamp socket

• Environmental Ratings: Certified for dry locations and damp locations

• Manufacturing Tracking: UL Listed (File E500176) for USA and Canada

Product Configurations and Wiring Engineering

Single-End vs. Double-End Bypass Flexibility

Our internal wiring arrays can be customized to match your specific contracting preference or regional utility rebate guidelines:

• Single-End Type B Configurations: Wired to guide both Line (L) and Neutral (N) power vectors to a single non-shunted lampholder terminal side. Excellent for standard direct-wire LED tubes.

• Double-End Type B Configurations: Wired to feed Line to one end of the linear chassis and Neutral to the opposing end cap terminal side using shunted or non-shunted configurations, speeding up installation for double-ended bypass lamps.

Architectural Prismatic Optics

The clear, wrap-around prismatic lens utilizes precision-molded interior linear ridges to break up raw light. This layout scatters illumination outward in a wide, balanced path, eliminating harsh hot spots and reducing glare across low-ceiling pathways, keeping spaces comfortable.

Advanced Controls & Field Modifications

To maximize building automation goals and pass modern ASHRAE energy codes, Brandon can integrate advanced component modules during our make-to-order assembly process:

• Integrated Motion Sensors: High-frequency occupancy or daylight harvesting sensors can be integrated directly inside the frame to maximize energy conservation in low-traffic zones.

• Manual Pull Chain Switches: Traditional heavy-duty pull chain controls can be factory-mounted to individual units for localized utility area handling and workshop control.

• Emergency Battery Backup Options: Integrated emergency drivers can be pre-wired to specific sockets, delivering 90 minutes of code-approved path illumination during structural power dropouts.

Commercial Applications and Installation Scenarios

Commercial Warehouses and Exhibition Halls

The rugged steel body architecture thrives under continuous use in high-traffic commercial interiors. It provides balanced, reliable background illumination for open layout exhibition halls, busy warehouses, and large distribution networks.

Workshops, Garages, and Utility Spaces

Rated for damp locations, the housing resists ambient dust and humidity. This makes the series highly effective for commercial loading docks, manufacturing workshops, corridors, storage facilities, and mechanical rooms.

Versatile Mounting Adaptability

Every fixture package includes complete installation instructions supporting a variety of architectural mounting layouts:

• Surface Mounted: Fastens cleanly flat against structural drywall or concrete panels.

• Suspended Chain Mounting: Easily hung over work planes using standard v-hook brackets and support chains.

• Suspended Cable Mounting: Compatible with adjustable aircraft cable kits for sleek, modern, low-hanging commercial installations.

Frequently Asked Questions (FAQ)

Q1: What is the significance of the UL Listed File Number E500176 for this fixture?

A: UL Listed File Number E500176 is Brandon’s official regulatory certification mark. It proves that our lamp ready wrap housings have been independently tested and certified to meet the strict electrical safety standards of the United States and Canada (UL/cUL). Having a verifiable UL tracking code allows electrical contractors to pass municipal building inspections smoothly without job-site rejections.

Q2: What is your factory’s production capacity for large wholesale project orders?

A: As a direct source manufacturer, our production plant maintains a scalable monthly capacity of 60,000 to 70,000 units for this wraparound series. Operating on a Make-to-Order (MTO) business model, this high volume capacity allows us to provide rapid, predictable manufacturing lead times and consistent product quality for large-scale commercial bids and supply chain contracts.

Q3: Is this Lamp Ready Wrap Fixture pre-wired for Single-Ended or Double-Ended Type B LED tubes?

A: We offer absolute wiring flexibility. Because we operate as an OEM/ODM factory, we can pre-configure the internal socket harnesses to your exact specification—either pre-wired for Single-End bypass or Double-End bypass Type B tubes. Please specify your preference when requesting a quotation so our engineering team can align the internal shunted or non-shunted lampholders accordingly.

Q4: Why choose a Lamp Ready Housing instead of an Integrated LED Wrap?

A: Choosing a direct wire wraparound housing provides far better long-term cost-effectiveness and flexible maintenance. With an integrated fixture, a component failure means the contractor must replace the entire unit, requiring expensive electrical labor. With our lamp ready housing, if a light engine fails years down the road, facility maintenance crews can simply swap out the individual T8 lamp in seconds without disturbing the main structural steel body, ceiling anchorage, or structural wiring.

Q5: What is the maximum wattage and voltage threshold for this 4ft housing?

A: The heavy-duty steel body housing is engineered to support up to 22W maximum per T8 lamp socket. Electrically, our factory equips these fixtures with universal internal wiring configurations that support standard North American AC 120-277V commercial lines, or specialized Canadian-spec AC 120-347V lines upon project request.