The LED Vaportight High bay is the fixture that features the vapor tight waterproof features and high bay high lumens features. It is widely used in these applications where require high lumen output and waterproof.

If you are looking for the vaportight high bay, the below ones you should review and study.

TechBrite’s LED Vaportite High Bay can take on the toughest environments. Rated IP67, the LED Vaportite High Bay is designed to minimize the retention of liquids or debris when hosed down.
The standard stainless steel hardware makes it an ideal solution for most environments and is an ideal replacement for metal halide or T8 fixtures.

The Vapor Tight High Bay LED VTH LED is a low profile industrial linear luminaire designed for durability and reliability in wet locations. It features a UL 5VA fiberglass housing with an F1 weatherability rating and a polycarbonate impact-resistant diffuser. It’s designed to be used in warehouses, freezers, and food processing areas that require luminaires with a wash down rating. Operating temperature: -40°C to +50°C (-40°F to +122°F).

The Ironclad® LED Vapor Tight High Bay is an ideal retrofit for fluorescent fixtures commonly installed in applications exposed to moisture, dust and other harsh elements that require frequent wash down. With lumen outputs ranging from 22,000 to 33,000
and boasting up to 140 LPW, this high efficiency, nonmetallic LED solution replaces a 6 lamp T8 or 6 Lamp T5 fixture.

Light Distribution: Beam Angles
Frosted Lens: 108°, Clear Lens: 115°
Applications: Food & Beverage Processing, Industrial Facilities, Tunnels, Cold Storage, Warehouses, Wastewater Treatment Plants & Natatoriums
Certifications: DLC, cULus, NSF Splash Zone, RoHS,
IP65, IP66 Watertight & Dust-proof, IP67, NEMA4X
Watertight, NEMA5 Dust-tight, UL Wet Location,
UL1598A Marine Grade

These vaportite LED high bay fixtures are versatilely designed for long life and durability when used as prescribed. Gear trays are die formed from cold rolled steel with a minimum 87% total reflectance and supported by 4 stainless steel spring fittings, the fixture can be opened or latched from either side for easy installation and maintenance. The stainless steel latches provide durability and chemical resistance. The captive design of the latch will not allow it to fly off during maintenance. There are twelve latches per unit to assure positive lens retention, which can be made tamper resistant with the addition of tamper resistant stainless steel screws. Lenses are available in water clear or frosted in a choice of 100% impact resistant acrylic for maximum light transmission and longevity or UV
stabilized polycarbonate for temperature extremes and maximum impact resistance.

Easily mounted with V-hooks, cables, or special ceiling mount brackets, no holes need to be drilled through the housing. Stainless steel V-hooks with hook hangers are available and are UL rated for 4 times the fixture weight. Cable hangers are compatible with cable systems for easy installation. The stainless steel ceiling mount system allows 1.25” between the ceiling and housing for heat dissipation, air flow, and cleaning. Perfect for those applications that require: washability/hose down, the ability to withstand reduced temperatures and moderate impact, and that seals out dust and other contaminants. Designed for easy assembly, installation, and maintenance.

• Ideal for food processing, breweries, industrial facilities, car washes, and commercial kitchens where the application requires or waterproof and/or dust proof fixture
• UL Wet Location; IP66, IP67, with sensor IP65; High Pressure Washdown up to 1500PSI, NEMA 4X Housing
• TVSS and Wet Location sensor options available
• Stainless steel 316 Marine Grade latches with stainless steel mounting clips come standard with fixture
• Voltage: 120-277v, 347v, 480v
• Rated Life: 125,000 hours

• Multiple mounting methods for compatibility in most environments
• Various lumen outputs to meet required light levels
• Offered in both 2′ and 4′ lengths
• Stainless steel 316 marine grade latches are standard, stainless steel mounting brackets included with fixture
• Durable, lightweight, white, UL 5VA (f1) reinforced fiberglass body
• Acrylic, impact resistant, shallow ribbed frosted lens
• 10 kA surge protection available

Here A very tough enclosure for demanding environments. For use in both indoor and outdoor applications where dust and water resistance is required. Ideal for refrigerated storage, food processing facilities, beverage and bottling facilities, exterior retail, construction sites and gymnasiums.
These vaportite LED high bay fixtures are versatilely designed for long life and durability when used as prescribed. Gear trays are die formed from cold rolled steel with a minimum 87% total reflectance and supported by 4 stainless steel spring fittings, the fixture can be opened or latched from either side for easy installation and maintenance.
The stainless steel latches provide durability and chemical resistance. The captive design of the latch will not allow it to fly off during maintenance. There are twelve latches per unit to assure positive lens retention, which can be made tamper resistant with the addition of tamper resistant stainless steel screws. Lenses are available in water clear or frosted in a choice of 100% impact resistant acrylic for maximum light transmission and longevity or UV stabilized polycarbonate for temperature extremes and maximum impact resistance.
Easily mounted with V-hooks, cables, or special ceiling mount brackets, no holes need to be drilled through the housing. Stainless steel V-hooks with hook hangers are available and are UL rated for 4 times the fixture weight. Cable hangers are compatible with cable systems for easy installation. The stainless steel ceiling mount system allows 1.25” between the ceiling and housing for heat dissipation, air flow, and cleaning. Perfect for those applications that require: washability/hose down, the ability to withstand reduced temperatures and moderate impact, and that seals out dust and other contaminants.
Designed for easy assembly, installation, and maintenance.

• Entry holes for 1/2” NPT/M20 fittings
• Optional hole in 1 end or holes in both ends
• Optional cable, V-hook or ceiling mount accessories
• Very durable
• Easy to clean and service
• Stainless steel hardware
• Impact resistant lenses in Water Clear or Frosted
• Wash down design
• RoHS Compliant
• Operates in low temperature applications such as refrigerated storage/freezers
• CETLUS listed for wet locations
• DLC listed in certain models

More About the LED Vaportight High Bay fixture, please click HERE!